SATA II PCI 2 1 + 1 Port Raid Card
Supports RAID 0 (stripping) for performance and RAID 1 (mirroring) for reliability!
Supports SATA II NCQ (Native Command Queuing) to maximize system performance
Breaks the 137GB barrier! Works with various brands of large capacity SATA/SATA II hard disk drives
Features
| Version: v1.0 | |
| Regulatory approval(s): CE (1998) | |
| OS support: Windows® 98SE/NT 4.0/ME/2000/XP/Server 2003 | |
| Port type: Two internal Serial ATA II ports | |
| Slot type: 32-bit PCI | |
| Compliant with PCI plug-n-play 2.3 | |
| Compliant with Serial ATA 1.0a and Serial ATA II extensions to Serial ATA 1.0a specification | |
| Features independent 256-byte FIFO buffers per channel for host reads and writes | |
| Supports data transfer rates up to 1.5Gbps (150MB/sec) | |
| Supports SATA II NCQ (Native Command Queuing) to maximize system performance | |
| Provides two independent channels to connect up to two SATA/SATA II HDDs | |
| Supports RAID 0 (stripping) for performance and RAID 1 (mirroring) for reliability | |
| JBOD (Just a Bunch Of Disks) feature provides multi-drive capacity for easy accessing | |
| Provides both full- and low-profile compatibility with all kinds of computer chassis | |
| Provides LED indication for device access per channel | |
| Can be used as the boot controller when a bootable device is attached | |
| Breaks the 137GB barrier! Works with various brands of large capacity SATA/SATA II hard disk drives |
- Pentium or equivalent PC with one available PCI slot
- Windows® 98SE or later
Package Contents
-
SATA II 1 + 1 -Channel RAID PCI Serial ATA data cable Serial ATA power cable Quick installation quide Driver software
Specification: