Introduction

The USB 2.0 IDE Adapter implements a bridge between a USB port and an ATA- or ATAPI- based mass storage device port. This bridge adheres to the Mass Storage Class Bulk-Only Transport Specification. Hardware design allows CBW command queuing, which allows data transfer rates up to the USB theoretical maximum with vendor specific drivers.

Features

• Complies with USB-IF specifications for USB 2.0, the USB Mass Storage Class, and the USB Mass Storage Class Bulk-Only Transport Specification
• Operates at high (480-Mbit) or full (12-Mbit) speed
• Complies with ATA/ATAPI-6 Specification
• Supports 48-bit addressing for large hard drives
• Supports PIO modes 0, 3, 4, and UDMA modes 2, 4
• ATA interface IRQ signal support
• Support for a single ATA/ATAPI device configured either at master or slave mode

System Requirements

• Desktop or notebook computer with a USB port
• Systems with OS: MS Windows 98SE/ ME / 2000 / XP , Mac 10.X or up

Package Contents

• USB 2.0 IDE adapter
• Driver
• User's Manual
• Ultra DMA 33 cable
• Power Adapter

SUPPORTED O.S.

Functioning USB 2.0 IDE Adapter
Win 98SE	Vendor Support
Win ME	Build-In O.S.
Win 2000	Build-In O.S.
Win XP	Build-In O.S.
Mac	Build-In O.S.

Remarks